ESP and BAS idiot lights
03-14-2009, 02:21 PM
#11
JK Enthusiast
Thread Starter
Join Date: Oct 2007
Location: Vicksburg, Michigan, United States
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Got It!!
Looking at the PDF instructions online
Ïf the function is not terminated properly the lights/indicators may remain stuck on or off. Besure to exit the mode properly by enabling turn signal before removing module. If a clean exit does not occur, plug the module back in, enable the turn signals, and then remove the module. This can also be reset by removing and reconnecting the Positive(+) battery terminal.
Guess I should have read ALL of the instructions and not assumed anything.
Thanks to everyone who took the time to offer up advice.
Ïf the function is not terminated properly the lights/indicators may remain stuck on or off. Besure to exit the mode properly by enabling turn signal before removing module. If a clean exit does not occur, plug the module back in, enable the turn signals, and then remove the module. This can also be reset by removing and reconnecting the Positive(+) battery terminal.
Guess I should have read ALL of the instructions and not assumed anything.
Thanks to everyone who took the time to offer up advice.
