Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

EVO 1/4 Pounder install question

Old 05-20-2012 | 11:30 AM
  #1  
Capncc's Avatar
Thread Starter
JK Newbie
 
Joined: Aug 2011
Posts: 2
Likes: 0
From: Laguna Niguel,CA
Default EVO 1/4 Pounder install question

Installing the bumper on 11 JK Rubicon. When relocating the swaybar mount it appears your drilling the new mounting hole into the casing and using the original bolt to self thread into it. Correct? I noticed there is a non-threaded hole on the casing that could be tapped for the bolt but this would put the isolater at a 90 degree angle. Opinions requested. Thanks


I went ahead an tap that flange an attached it there. Got the bumper and winch on next is lights and wiring.

Click image for larger version

Name:	evo bump.jpg
Views:	820
Size:	76.6 KB
ID:	319373Click image for larger version

Name:	swaybar.jpg
Views:	202
Size:	69.9 KB
ID:	319374

Last edited by Capncc; 05-20-2012 at 05:38 PM.


Quick Reply: EVO 1/4 Pounder install question



All times are GMT -8. The time now is 03:57 PM.