I installed a fox 2.0 performance steer stablizer on my 2012 jk I'm running 35s with moped stag 3 lift. After installing stablizer my jeep started pulling to the left so I just stuck the stock one back on and problem went away runs straight as a string seems to me after looking at new fox stablizer it's loaded to stiff takes a lot of force to compress it any body else experience this problem.

 

typical with a gas charged steering stabilizer and, it is one of the reasons i prefer the factory stabilizer.

 

Thanks as of now I'm with
You

 

We have the fox steering stabilizer and we have no pull either way, car drives straight as an arrow. The fox stabilzer comes with 200 psi to 220 psi, I used a fox mountain bike air pump to let some out down to 120psi. Do a little at a time until you get it where you like it. Do not use anything other then the pump to let the nitro out because it comes out really fast and you would lose it all at once.