I will be insatlling a teraflex 2.5 coils spring spacer lift.
however, I will also install an arb deluxe bumper and winch.

could someone advise me on how big of an extra spacer in the front will be
ok to compensate for the bumper and winch weigh?
so I can order it,,

thanks

 

You should be fine with a 3/4" spacer.

 

I leveled out with a 1/2" spacer, I have a LOD mid-with and Warn 9.5ti winch. I figured 3/4" because the op is running a full sized Arb bumper. In any event 1/2"-3/4" should be fine.

 

thanks for the replies...will go with the 3/4

..