I just bought a FT 3" Premium Flex kit. It will be delivered in about 2 days. I plan on installing. Anyone done this one on there own?

I am looking for advice and some pointers.

Any tips?

 

http://project-jk.com/jeep-jk-write-...ation-write-up

 

Thanks for the link. Thats a good resource. Thats for the ultimate which has a few more items than the lift I bought.

Should be very similar.

Any other tips?

 

buy a new bolt for the passenger side upper control arm..

its a hell of alot easier to cut it off, than to remove the exhaust. Lubricate the bushings inside and out prior to install, and dont forget to use anti seaze on the nuts and bolts... You'll thank me later..

 

I will keep that in mind. Before I actually start, I am laying my every move.