Hardrock 4x4 harness bar for front seat
#1
JK Enthusiast
Thread Starter
Join Date: May 2013
Location: Alpine, CA/ Kingman, AZ/ Lemoore, CA
Posts: 203
Likes: 0
Received 1 Like
on
1 Post
Hardrock 4x4 harness bar for front seat
So i have a baby on the way and we wanna cage the jeep, however gotta have a carseat in there. So my question is for those of you who have this cage is there room for the carseat and if so can i see pics of it?
#2
JK Enthusiast
Join Date: Mar 2012
Location: Escondido, California
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
i havnt had a car seat in mine, but i think there is room. They fit very nice and close to the front seats. And two full size adults have plenty of room.
#6
Super Moderator
For reference, Graco Snugride 40 in a '12 2 door.
I'm 5'7 and that seat is at full stuff. I picked up the older, non reclining seat base since I took this picture and it gives me a half inch between the driver seat and the car seat. Better, but it's still a challenge.
I'm 5'7 and that seat is at full stuff. I picked up the older, non reclining seat base since I took this picture and it gives me a half inch between the driver seat and the car seat. Better, but it's still a challenge.
Trending Topics
#9
JK Junkie
You need to wear a 4 pt seatbelt to drive a baby around? How about skipping the harness bar? And while you're at it, get a full cage that actually does what it is designed to do. Bolting nice stuff to crap, results in nice looking crap.
There is a bung that can be used that would make the bar removable, so if you really do want the seatbelts, you can out the bar in when you wheel.
There is a bung that can be used that would make the bar removable, so if you really do want the seatbelts, you can out the bar in when you wheel.