Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Identifying a gear set?

Thread Tools
 
Old 01-13-2012, 03:38 PM
  #1  
JK Newbie
Thread Starter
 
DelmarvaJK's Avatar
 
Join Date: Dec 2011
Location: Columbia, MD
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default Identifying a gear set?

Since I bought my JK used from a dealer and it had a great deal done aftermarket wise to it and I didn't get a chance to talk to the previous owner how can I tell if I have the stock gears or aftermarket ones short of popping off the Diff cover and counting teeth?

Once again I'm new JK's and the wrangler community in general... Previously was into XJ's for a while...

The only reason why I ask is because the previous owner took the time to install "Solid" diff covers, and since I have a feeling a shop built the car for the owner I'm questioning...

Here's what I have:

2009 Saraha Unlimited
AEV Premium Front Bumper w/ IPF Lights
AEV 3.5" SC Lift
AEV 17" Pintler wheels w/ 35" MT BAJA ATZ
Fab Fours rear bumper w/ Tire carrier
Solid Diff Covers
aFe Intake (Just added)

Thanks for your patience, still learning a bunch about the JK!
Old 01-13-2012, 04:21 PM
  #2  
JK Enthusiast
 
Mr. Smiley's Avatar
 
Join Date: Nov 2011
Location: Holly Springs, NC
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default

https://www.jk-forum.com/forums/show...d-Up-rear-diff

Read this thread. On one of the post's it tells you how to check it by just rotating a tire. Hope that helps



Quick Reply: Identifying a gear set?



All times are GMT -8. The time now is 06:46 PM.