Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

installed trail dash, instantly got 3 codes and speedo won't work

Thread Tools
 
Old Apr 11, 2014 | 03:23 PM
  #1  
new jeep owner's Avatar
Thread Starter
JK Newbie
 
Joined: May 2011
Posts: 30
Likes: 0
From: MI
Default installed trail dash, instantly got 3 codes and speedo won't work

After installing my new trail dash I switched the DRL and fog options. Immediately after that I got 3 codes saying that was an issue with my left and right wheel and speed? After trying to call superchips, and realizing that they work banker's hours, I cleared the codes. I drove to the gas station and noticed that neither the stock speedo or the traildash speedo worked. While filling up I tried to switch to the 93 octane tune and that failed 5x. Has anyone had any of these issues? I won't be able to talk to superchips until monday.
Reply
Old Apr 11, 2014 | 03:49 PM
  #2  
TURTLECON's Avatar
JK Jedi
 
Joined: Oct 2010
Posts: 5,192
Likes: 3
From: REDONDO BEACH, CA
Default

One time with the Flashpaq my speedo wasn't working after installing a tune or bringing back the stock file (can't remember exactly which). I tried it again a 2nd time and that seemed to fix it.
Reply
Old Apr 11, 2014 | 05:04 PM
  #3  
Dahmer's Avatar
JK Enthusiast
 
Joined: Aug 2013
Posts: 408
Likes: 0
Default

I had an Edge programmer on my 05 F150 it did odd stuff like that. It ended up corrupting my stock tune now I'm stuck with it. Tuners Are great when they work.
Reply




All times are GMT -8. The time now is 02:10 AM.