Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Instructions to install Teraflex front leveler?

Thread Tools
 
Old Aug 17, 2009 | 11:03 AM
  #1  
GNNR's Avatar
Thread Starter
JK Enthusiast
 
Joined: Mar 2009
Posts: 215
Likes: 0
From: Hackensack, NJ
Default Instructions to install Teraflex front leveler?

I ordered some off of a website (won't link here), but no instructions and I can't seem to find any online. Linkage? They are the front 1" leveling spacers.

Dumb question, I know, but I don't do diddly without solid instructions.
Reply
Old Aug 17, 2009 | 11:10 AM
  #2  
azxr's Avatar
JK Enthusiast
 
Joined: May 2009
Posts: 226
Likes: 0
From: Marana, AZ
Default

Try this page.

http://www.teraflex.biz/category/tec...-instructions/

Near the bottom look for

1155200 JK leveling kit

The instructions say 1.5", but the parts list in the instructions mentions 1"

Last edited by azxr; Aug 17, 2009 at 11:14 AM.
Reply
Old Aug 17, 2009 | 05:22 PM
  #3  
GNNR's Avatar
Thread Starter
JK Enthusiast
 
Joined: Mar 2009
Posts: 215
Likes: 0
From: Hackensack, NJ
Default

Thanks! Got it.
Reply
Old Sep 2, 2009 | 08:22 AM
  #4  
wilywillie's Avatar
JK Enthusiast
 
Joined: Jan 2009
Posts: 196
Likes: 0
From: Richmond, Virginia
Default

Tell me what you think of it, GNNR.....
We're putting mine on this afternoon!!
Reply
Old Sep 2, 2009 | 09:23 AM
  #5  
nthinuf's Avatar
JK Jedi Master
FJOTM Winner
 
Joined: Jan 2008
Posts: 11,463
Likes: 165
From: Austin <--> Colorado Springs
Default

I would also suggest browsing any of the suspension install write-ups here.

https://www.jk-forum.com/forums/show...7&postcount=10

There isn't one 'specifically' for that levelling kit, but the steps are all the same for pulling the coils out and adding in the spacers. Pics and install comments go a long way when you've never done it before. (We all know that the manufacturers instructions are 'always' correct and easy to follow and all that, but ya know, I find that some first hand info, steps and pics is a good addition to the instructions.)

Last edited by nthinuf; Sep 2, 2009 at 09:29 AM.
Reply




All times are GMT -8. The time now is 12:01 PM.