So I have had led headlights cheapies off amazon that have functioned flawlessly for the last six months. Then I install quadratec led tail lights and this is where things get interesting. Passenger side tail light never hyperflashes. Drivers side hyper flashes most of the time but only does it for about seven seconds then flashes normal. I soldered in a new resistor still does the same thing. Swapped resistors from pass to drivers side still does it. Now the strangest part. Since I put the quadratec tail lights in now my headlights either hyper flash for thirty seconds and stay off, but fog lights always work or the headlights work. The led headlights worked flawlessly and had no anti flicker module or anything with them and worked great before putting these pos quadratec tail lights in. I have an extra quadratec led drivers side tail light and wired in a known working resistor and it still does the same thing so it can’t be the tail light or the resistor. My main concern is the headlights right now. Any suggestions on what module would work to get these headlights going again?