A Little Input Needed
Hey y'all, wondering if you might be able to give me some guidance on whether this wheel selection will work on an 08 2 dr.
This wheel: http://www.quadratec.com/products/92613_0900_07.htm
With...
These adapters: http://www.quadratec.com/products/92807_006.htm
The Wheel is meant for a TJ's 5x4.5 bolt pattern and already has 4 inches of backspacing. Now in order to run it on the JK I would need the adapter shown above which is another 1.4 inches. Now my worrying stems from whether my backspacing will be too low and push the 35x12.5 km2s too far past the wheel flares? Will this set up even be practical/wise? WOL, sure wouldn't mind your input either man.
Thanks
This wheel: http://www.quadratec.com/products/92613_0900_07.htm
With...
These adapters: http://www.quadratec.com/products/92807_006.htm
The Wheel is meant for a TJ's 5x4.5 bolt pattern and already has 4 inches of backspacing. Now in order to run it on the JK I would need the adapter shown above which is another 1.4 inches. Now my worrying stems from whether my backspacing will be too low and push the 35x12.5 km2s too far past the wheel flares? Will this set up even be practical/wise? WOL, sure wouldn't mind your input either man.
Thanks


