Locker bypass switch
 

So a while ago I spliced some wires by the battery for the electronic lockers on my Rubicon so I can manually activate them to my liking regardless of what position the transfer case is in. Now generally when I do this and the locker activates, the locker light flashes. However as of late when I activate the locker, sometimes the light flashes and other times it doesn't. I thought it was just a loose connection but in fact the locker does still activate and you can hear the solenoid, just no flashing light.

Not that big of a deal, but I was curious if anyone else had this happen?

We did my dad's 2010 Rubicon with the instructions available from eBay. When you select the switch we installed to engage the locker by breaking the ground the light on the dash flashes showing the locker is on.

Haven't noticed it not working but we don't lock down often. I'm running the wires today to install my bypass switches. I'll pay attention and let you know.