New tire carrier!
3 Attachment(s)
This is a prototype. But it is basically what it will look like, just a cosmetic refinement or two and it will be ready to go. Tell me what you think! Patent pending.
|
1 Attachment(s)
Mount has an up and a down position. Allows the rear window to be used again!
|
Hmmm... Ur in California, so thats in my favor... Let's see how it looks when your done (particularly around the hinge). And as long as ur not as expensive as teraflex.. I'd get one :beer:
|
Not far from you, if you want to come check it out let me know. I will be at KOH later today-Sat.
Hinge is the main part I'm working on right now, these were made with my manual mill, the final ones will be CNC'd |
So your going to be mass producing them?
|
Originally Posted by Ryan0260
(Post 3416362)
So your going to be mass producing them?
|
Im far away but depending on fit and finish, and price i may be very interested.
|
I can tell you my door closes better than it ever did with the factory hinges. Did I say it is Made In The USA?
|
Sweet, keep us posted
|
Subscribed!
|
Nice. What size tire will it hold, and have you figured a price range?
|
Has a beadloclked 37" on it right now with a molly setup inside the door, I will have to do some testing with a 40". Holds a 37" without a wiggle. I can't talk price until I get a vendor star, waiting for reply on getting one. Will be less (much less i hope) than similar products on the market.
|
Is it a hinge system? Doesn't look like it attaches to the bumper. Any idea when these will be ready to ship?
|
Also, what is the install like?
|
Yes it is a hinge system. Install is very easy took me 1/2 hr (I do have some practice at it though) So I'd figure at most 1 1/2 hrs. You just remove the stock tire carrier and stock hinges and install the new HD hinge assembly. Trying to finish up the hinges to make them look better, that is just a matter of looks though. Trying to be able to start shipping soon, waiting on info from JK-Forum to get my vendor star before I can post price/shipping dates.
|
Subscribed and interested.... PLEASE DONT RAPE US CANADIANS IN SHIPPING!!!! lol
So tired of that!!!!! |
All I can say is, it's about time someone add a touch of capitalism. Kudos sir, looking forward to the outcome.
|
Subscribed and very interested !!!
|
Looks like good stuff. Any plans to do anything else? Bumpers, sliders, skids, etc.
|
How much will it weigh as compared to the aluminum version(TF)?
|
Originally Posted by BigSteve
(Post 3416806)
Looks like good stuff. Any plans to do anything else? Bumpers, sliders, skids, etc.
|
Originally Posted by Heholua
(Post 3416811)
How much will it weigh as compared to the aluminum version(TF)?
|
Can you post a pic without the tire on it? Any possibility of attaching a high lift jack?
|
Originally Posted by Cpthulk
(Post 3416889)
Can you post a pic without the tire on it? Any possibility of attaching a high lift jack?
|
Looks like you're using TeraFlex's R&D just as Dennis said competitors would in the TeraFlex Tech YouTube video!
|
Hmmmmmm...... Avoided my concern/question. We Canadians are going to be raped with shipping right? I already have myself and 2 others very interested and that's just in one afternoon.... Just worried about shipping.
|
1 Attachment(s)
I get ready for that cease and desist letter from Teraflex for ganking their design considering a patent has been issued.
Attachment 419056 |
Originally Posted by JMann2380
(Post 3417180)
I get ready for that cease and desist letter from Teraflex for ganking their design considering a patent has been issued.
Attachment 419056 |
I'm interested, subscribed
|
Originally Posted by JMann2380
(Post 3417180)
I get ready for that cease and desist letter from Teraflex for ganking their design considering a patent has been issued.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=419056"/> |
Originally Posted by robsjeep9
(Post 3417161)
Hmmmmmm...... Avoided my concern/question. We Canadians are going to be raped with shipping right? I already have myself and 2 others very interested and that's just in one afternoon.... Just worried about shipping.
If you can work out deals for us north of the boarder I'm sure your product will expand very quickly! |
Originally Posted by 4W-Jive
(Post 3417243)
I totally get your point, but doesn't it seem pretty broad to patent a beefier hinge? It's kind of a common sense solution to a known issue. No ill will intended, wish the OP luck but as a business owner with multiple trademarks, copyrights and patents, my Cease and Desist would already be in the mail! |
Originally Posted by AdvJeep
(Post 3417252)
Agree completely! Only reason I haven't gone with a tire carrier or hd hinge like teraflex yet is because it costs way to damn much to ship or buy here! Looking at almost $1000 for the entire package after tax and shipping that teraflex offers :(
If you can work out deals for us north of the boarder I'm sure your product will expand very quickly! |
Originally Posted by Jeeping4Fun
(Post 3417265)
From my research NR offers the Teraflex hd hinge shipped for free for far less than $1k |
Originally Posted by AdvJeep
(Post 3417273)
Add the extra cost for being in NR.ca and it comes out to just shy of $900 then add 12% tax hence my cost evaluation.. If I was in the states it would be way cheaper like you said. |
Originally Posted by wecf
(Post 3416337)
This is a prototype. But it is basically what it will look like, just a cosmetic refinement or two and it will be ready to go. Tell me what you think! Patent pending.
|
Originally Posted by robsjeep9
(Post 3417161)
Hmmmmmm...... Avoided my concern/question. We Canadians are going to be raped with shipping right? I already have myself and 2 others very interested and that's just in one afternoon.... Just worried about shipping.
|
Originally Posted by JMann2380
(Post 3417180)
I get ready for that cease and desist letter from Teraflex for ganking their design considering a patent has been issued.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=419056"/> |
Originally Posted by wecf
(Post 3419285)
Hi, I'm out at KOH working the pits so I have limited time to reply. Shipping will cost no more than it costs me to ship it. |
Originally Posted by 4W-Jive
(Post 3417243)
I totally get your point, but doesn't it seem pretty broad to patent a beefier hinge? It's kind of a common sense solution to a known issue. |
All times are GMT -8. The time now is 06:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands