Before I pull the trigger, I figured I would get some input from those in the know. I want to run 35's on my '08 Unlimited X. I have heard that the OME kit is exceptional, but may need a little help with 35's. Would a 1" inch body lift do the trick. Is there anything negative to take into consideration? I am thinking of picking up the OME HD kit, as I have already picked up a Rancho Rockgear front and rear bumper, and will surely be placing a winch on the front end.

Any thoughts on this?

 

i have seen guys running the OME HD with the extra stiff springs and 35's fine and you wont rub bumpers since you have new ones the BL will just give you some extra room to flex

 

X2! I run a full traction 2" lift with the more 1" body lift and I my 35"s run and look great!

 

pm captain hook on here, he is running this exact setup and i think the 35's just fit with some fender rub when flexed

 

OME with trimmed flares will do it for you.



Those are 33s, I know for a fact 35s will stuff perfectly when flexed.

 

Thanks for the input....PM'd Captian Hook.......

 

I'm running the OME HD kit with 35" KM2's with no body lift and no rubbing.

 

Any bump stops or no?

 

im running 35s with the ome HD plus daystar.75 poly lift, plenty or room to strech out

 

I'm running the OME HD with 1" BL. I've only rubbed once when i fully compress over a sharp steep mogul (too fast). Never found the rub just the sound maybe it didn't rub at all.