ORE EVO C gussets and AEV Premium lift??
#1
JK Junkie
Thread Starter
ORE EVO C gussets and AEV Premium lift??
I already had ORE's C gussets installed a while back, now I'm looking to remove my existing lift and install AEV's premium 3.5" lift. My question is, will it work? I read the installation instructions on a Quadratec's site, and it looks like it will not. Can someone please clarify this for me??
(it looks like it wouldn't be a problem if they were installed AFTER the lift, but in my situation, they are already welded on)
(it looks like it wouldn't be a problem if they were installed AFTER the lift, but in my situation, they are already welded on)
#3
JK Junkie
Thread Starter
There are relocation brackets for the swaybar end links/trackbar at the front axle, and it looks like the bracket rests on the outboard side of the coil spring perches.. But again, I'm going by pics and hopefully I am wrong and it works..
(I'd post a pic, but I'm using my phone as I am not home)
(I'd post a pic, but I'm using my phone as I am not home)
#4
There's another thread on this somewhere around here. The fellow said it just took a little bit of grinding. Hope to get to this myself this weekend. I'll let you know.
#5
There are relocation brackets for the swaybar end links/trackbar at the front axle, and it looks like the bracket rests on the outboard side of the coil spring perches.. But again, I'm going by pics and hopefully I am wrong and it works..
(I'd post a pic, but I'm using my phone as I am not home)
(I'd post a pic, but I'm using my phone as I am not home)
https://www.jk-forum.com/forums/show...ht=gussets+aev
https://www.jk-forum.com/forums/show...ht=gussets+aev