Poly perfomance nitrogen fill kit
JK Newbie
Joined: Mar 2015
Posts: 24
Likes: 0
From: Woodinville, WA
No experience with it, but assuming you're talking about the one with a new nitrogen bottle, that's sort of just a waste of money. The first time you go swap it out at a welding shop, you have an old used bottle (unless you're willing to probably pay extra, and wait around 2 weeks for them to actually take your bottle and fill it).
You could go buy a bottle from your local welding shop for <$100, $50 regulator on amazon, hose, and a chuck and be in for <$200.
You could go buy a bottle from your local welding shop for <$100, $50 regulator on amazon, hose, and a chuck and be in for <$200.
JK Jedi
Joined: Oct 2010
Posts: 6,222
Likes: 376
From: Southwest Reno, NV
Its a nice kit and expensive, Welding shops will fill the bottle and you will have to wait for it but it will last a long long time if you are just using it on shocks. If you don't need the fancy case just get the no loss filler like the fox https://www.polyperformance.com/fox-...e-802-02-002-a offers. King has one too King Shocks Tools « King Off-Road Racing Shocks : kingshocks.com but not listed there. You can get the tank regulator and hose at your local welding shop.