Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Question about Full Traction 2" lift

Thread Tools
 
Old Apr 30, 2012 | 07:48 PM
  #1  
rer292's Avatar
Thread Starter
JK Newbie
 
Joined: May 2009
Posts: 13
Likes: 0
From: Charlotte,NC
Default Question about Full Traction 2" lift

Looking for some advice,

Have a chance to buy a new Full Traction 2" BB dirt cheap (under $90). I think its the leveling one. Have read about discs slipping out in rear and also collapsing but the threads are older (2008). Looking for current info on this lift. I have a 12 JKU daily driver, little or no off-road. Any input or info is greatly appreciated.
Reply
Old Apr 30, 2012 | 08:00 PM
  #2  
DKehler's Avatar
JK Freak
 
Joined: Sep 2011
Posts: 914
Likes: 6
From: Las Vegas, NV
Default

It's 2" spacers all around. You can make the back 1 1/2" by removing the stock spring isolator. If your not really off roaring you'll be fine with this kit because it doesn't include parts some of the other more complete kits have.
Reply
Old Apr 30, 2012 | 08:42 PM
  #3  
rer292's Avatar
Thread Starter
JK Newbie
 
Joined: May 2009
Posts: 13
Likes: 0
From: Charlotte,NC
Default

According to their website it is 2" in front, 1.5" in rear. FTS7102 is the part number. I figure for the money its worth it. Just concerned about some past issues.
Reply
Old May 1, 2012 | 07:32 PM
  #4  
DKehler's Avatar
JK Freak
 
Joined: Sep 2011
Posts: 914
Likes: 6
From: Las Vegas, NV
Default

It's only 1 1/2" in the rear if you leave out the factory spring isolator. That's how its a leveling kit. What past issues are you concerned about?
Reply
Old May 2, 2012 | 07:06 AM
  #5  
Csciam1's Avatar
JK Enthusiast
 
Joined: Nov 2011
Posts: 187
Likes: 0
From: Baton Rouge, Louisiana
Default

I have a bb on the way can't wait
Reply




All times are GMT -8. The time now is 12:09 AM.