|
Originally Posted by Ryan0260
(Post 3057794)
Did you notice any increase in power with the VT setup?
Originally Posted by original_jbond
(Post 3058517)
Interested as well! Dynomax what does that run on 2007 2-door. Want the rumble but no drone. Flowmaster has too much drone for me.
|
Originally Posted by Dynomax
(Post 3057303)
Have you heard of our VT cat-back systems for the JK yet?
Dynomax® Performance Exhaust | 2011-2007 JEEP JK Wrangler Unlimited w/3.8L 4 DR: Single - 2.5" Cat-Back system, 3" Polished Stainless Steel Tip, DynoMax VT® This system has a nice "rumble" when you get on it, but when cruising no drone. Stainless steel construction. Made in the USA! Limited lifetime warranty. (save that receipt) You also have a 90 day sound/performance guarantee as well. Easy install, much smaller and compact than stock, but not as restrictive as stock. Let me know if you have any questions. |
Originally Posted by BLK07
(Post 3058569)
How much....$
I don't sell direct, look under the vendor list and MANY of the vendors on here sell this system. Jeep Add On's, Off Road Evolution, Quadratec and 4WD come to mind as a starting point. We have a mail in rebate also until the end of the month as well. |
It's a shame that it is $500. I really like it but that is some serious money for an exhaust.
|
Originally Posted by original_jbond
(Post 3061322)
It's a shame that it is $500. I really like it but that is some serious money for an exhaust.
Don't forget the rebate too. |
Was just at the 4wheel parts show I. Ontario ca. You can get the whole system for 400.00 plus a 75.00 cash/visa rebate if you buy it buy 30june. I would check with all your local shops. Easy install. Good luck
|
Originally Posted by gARY b
(Post 3061736)
Was just at the 4wheel parts show I. Ontario ca. You can get the whole system for 400.00 plus a 75.00 cash/visa rebate if you buy it buy 30june. I would check with all your local shops. Easy install. Good luck
I am lucky to say I have driven all the vehicles that were there this past weekend....:rock: JK-8 Camaro 2012 JK 2011 Mustang |
So Dynomax, I guess this is a hard question to ask but...how does the VT muffler CAT back compare to:
aFe Power Mach Force XP Hi-Tuck 2.5" CAT Back Exhaust (Part # 49-46208) MBRP Installer Series Cat Back Exhaust System in Aluminized Steel (Part # S5516AL) I want "some growl" (it is a 3.8L) without the drone and tin-can sound. As I said in an earlier post, I think the flowmaster has too much growl and drone for me. I understand you are running the promotion right now but according to Quadratec, it is $500. That is some serious money for an exhaust that is only a CAT back. Thank you for your help and I appreciate your "activeness" on these forums. |
I will try my best to answer this, with the benefits of our system.
First you are going to want a system that is stainless steel, and not aluminized, because since you are in PA aluminized won't last as long. We also offer a lifetime warranty as well. Save that receipt. We have found that 2.5" is a PERFECT exhaust size for the JK, anything bigger than that isn't need. 3" is really for vehicles that are pushing some power....not the mini van engine. There is no drone again with this system, I can't talk to the others though.... I understand on the money as well, keep looking around, you should be able to find it cheaper. :wink:
Originally Posted by original_jbond
(Post 3062824)
So Dynomax, I guess this is a hard question to ask but...how does the VT muffler CAT back compare to:
aFe Power Mach Force XP Hi-Tuck 2.5" CAT Back Exhaust (Part # 49-46208) MBRP Installer Series Cat Back Exhaust System in Aluminized Steel (Part # S5516AL) I want "some growl" (it is a 3.8L) without the drone and tin-can sound. As I said in an earlier post, I think the flowmaster has too much growl and drone for me. I understand you are running the promotion right now but according to Quadratec, it is $500. That is some serious money for an exhaust that is only a CAT back. Thank you for your help and I appreciate your "activeness" on these forums. |
Thank you the response, any idea where that cheaper place is? Wink
|
| All times are GMT -8. The time now is 06:04 AM. |
© 2026 MH Sub I, LLC dba Internet Brands