Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

R/C 2.5" lift

Thread Tools
 
Old Aug 10, 2009 | 03:03 PM
  #1  
Wranger X's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jan 2007
Posts: 118
Likes: 0
From: Levittown, PA.
Default R/C 2.5" lift

This is the first time I do a lift, I was reading that I would have to adjust the draglink before driving my rig. How hard is it to adjust?
Reply
Old Aug 10, 2009 | 03:06 PM
  #2  
TxCop07's Avatar
JK Freak
Vet Army

 
Joined: Jan 2008
Posts: 992
Likes: 0
From: Somewhere Down in Texas
Default

Are you talking about adjust the draglink to recenter the steering wheel? If so it is very simple. Just loosen the two bolts on the draglink and twist the center piece til the wheel is centered.
Reply
Old Aug 10, 2009 | 03:08 PM
  #3  
jakecee's Avatar
JK Newbie
 
Joined: May 2009
Posts: 28
Likes: 0
From: Bathurst, NB
Default

check out this link
http://project-jk.com/jeep-jk-write-...-end-alignment
Reply
Old Aug 10, 2009 | 03:14 PM
  #4  
Wranger X's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jan 2007
Posts: 118
Likes: 0
From: Levittown, PA.
Default

Originally Posted by TxCop07
Are you talking about adjust the draglink to recenter the steering wheel? If so it is very simple. Just loosen the two bolts on the draglink and twist the center piece til the wheel is centered.
Thanks, sounds like and easy step.
Reply




All times are GMT -8. The time now is 05:23 PM.