Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Simple answer for a lift question

Old Mar 20, 2015 | 09:36 AM
  #1  
thecapn226's Avatar
Thread Starter
JK Newbie
 
Joined: Mar 2015
Posts: 2
Likes: 0
From: South Texas
Default Simple answer for a lift question

After several days of looking around and calling teraflex I am unable to get a straight answer. I have a JKU Sport with 17" wheels, BFG AT TAKO2 275/70R17. I am looking at a leveling kit (BB, 2" front, 1" back spacers/pucks). Will this lift require a set of spacers to offset the backspacing of the rear, or front, to keep the sway bar from rubbing?
Reply
Old Mar 20, 2015 | 09:38 AM
  #2  
TeraFlex's Avatar
Sponsoring Manufacturer
 
Joined: Apr 2007
Posts: 6,824
Likes: 3
From: Utah
Default

No it will not be required unless you get closer to a 305 sized tire.
Reply
Old Mar 20, 2015 | 09:50 AM
  #3  
thecapn226's Avatar
Thread Starter
JK Newbie
 
Joined: Mar 2015
Posts: 2
Likes: 0
From: South Texas
Default

Thanks
Reply
Old Mar 20, 2015 | 10:26 AM
  #4  
tarpon4me's Avatar
JK Freak
Veteran: Air Force
JK-Forum Ambassador
 
Joined: Jun 2014
Posts: 724
Likes: 5
From: Florence, SC
Default

I also have 33x11 tires on my stock wheels. I'm not sure how your wheels are, but you may find you need to put a couple washers on each side of your steering stops. You may not, but when I went to a 2" lift and 33's on stock wheels, I had an ever so slight rub at full lock/flex. The washer took care of it.
Reply



All times are GMT -8. The time now is 06:14 AM.