And so it begins (modification plan)
Thread Starter
JK Super Freak
Joined: Mar 2009
Posts: 1,529
Likes: 1
From: Austin, TX
And so it begins (modification plan)
First: damn you all! This is the Post I Never Thought I Would Write, but this forum is just so chock full of information and encouragement that I'm hooked.
Second: I've begun to get comfortable with an upgrade path, but wanted to run it by the gurus to see if I'm missing major components or doing things out of order. I'm not looking for anything too extreme. Quality is important to me. Thanks for any feedback.
Phase I: 2.5" Teraflex coil lift (already have OME shocks--or get T/F shocks and sell the OMEs), JKS adjustible front track bar, and Teraflex lower front control arms.
Phase II: Expedition One rear bumper w/tire carrier and ExpOne front bumper, PJ rock sliders
Phase III: 17x8.5 MB72s, 285/70-17 DuraTracs, AEV Procal (to fix speedo, etc)
Phase IV: 4.88 gears, Warn XD9000i, MBRP alum black exhaust.
Total build time: 2-3 years if I'm lucky.
Second: I've begun to get comfortable with an upgrade path, but wanted to run it by the gurus to see if I'm missing major components or doing things out of order. I'm not looking for anything too extreme. Quality is important to me. Thanks for any feedback.
Phase I: 2.5" Teraflex coil lift (already have OME shocks--or get T/F shocks and sell the OMEs), JKS adjustible front track bar, and Teraflex lower front control arms.
Phase II: Expedition One rear bumper w/tire carrier and ExpOne front bumper, PJ rock sliders
Phase III: 17x8.5 MB72s, 285/70-17 DuraTracs, AEV Procal (to fix speedo, etc)
Phase IV: 4.88 gears, Warn XD9000i, MBRP alum black exhaust.
Total build time: 2-3 years if I'm lucky.
