Teraflex leveling kit
 

My leveling kit came yesterday. Anybody have a how to video to install? Directions aren't te beat

This is for a 2.5 lift, but should give you all the info you need:

TeraFlex 2.5" Budget Boost Lift

Use your stock scissor jack to spread the the axle down. And make sure to remove the brake line brackets.

Welcome to the forum.

very useful write up

I don't have that jack. Jeep came used without it. I have a floor jack and a hack from my parents cars. Might have to use those. I guess I'll put one on each side f the frame and one on the axle

I installed that lift today. I had to use coil spring compressors both front and back to get the coils back in.. When I lowered to rear axle I had to disconnect the emergency brake from the tub to have enough slack to get the spring out. Other than that went smooth. I installed 295/70/18 Trail Grapplers and wheel spacers.

Attachment 375022

This isn't in level ground but I have plenty of room.