Which TF Speed Bump w/RK 3.5 coils?
Thread Starter
JK Enthusiast
Joined: Jan 2009
Posts: 272
Likes: 0
From: Mesa, AZ
Which TF Speed Bump w/RK 3.5 coils?
Finally getting ready to install a 3.5 RK lift and am wondering which bumpstops to with?
I know RK and Jks has great options, but why not go with a better option since I live in the desert and naturally drive fast....
Any one have recommendations as to which bumpstop length 3" or 4" TF Speed Bump will work with the RK 3.5 coils on 35's and stock fenders? Not sure if front and rear lengths would be different or not, but your first hand knowledge is greatly appreciated in advance!!
I know RK and Jks has great options, but why not go with a better option since I live in the desert and naturally drive fast....
Any one have recommendations as to which bumpstop length 3" or 4" TF Speed Bump will work with the RK 3.5 coils on 35's and stock fenders? Not sure if front and rear lengths would be different or not, but your first hand knowledge is greatly appreciated in advance!!
JK-Forum Founder
Joined: Jul 2006
Posts: 36,534
Likes: 16
From: Laguna Niguel, CA
i would go with the 3". if you go with the 4", the fronts will sit too close to the axle bump pads and you will feel them tapping and even pushing back when driving around town. in the rear, they will do the same thing only on the frame jounce stops and, can even make your ride feel harsh. i ultimately pulled out the rears on my JK because of this.
