Hey guys, I have a quick question.
This weekend I am planning on welding up my artec truss to my front d44, also getting welded to the axle is the artec raised track bar mount. Now here comes my predicament, I have the synergy track bar and sector shaft brace and I'm wondering if the track bar will contact the sector shaft brace with the addition of the raised track bar mount?!?!?! I really hope not..... But let's see what you guys think, oh, I'm running 2.5" extended bump stops btw and I don't want to add anymore.

 

Bump, any help would be appreciated.

 

The synergy trackbar brace and sector shaft have no way of interfering with a raised trackbar mount. It's on the opposite side. I have a AEV raised trackbar bracket and a Synergy trackbar brace and it's impossible for there to be any interference. The synergy track bar is designed to work with the steering sector brace and a raised track mar mount like Artec or their own.

 

They do have a possibility of interfering with the sector shaft brace though, raising where the track bar mounts allows the track bar to travel higher than it would at the stock location. It will have the same range of motion but it will be raised higher then previously.

I got an email back saying that having the synergy track bar will help combat the raised mounting location of the trackbar. Thank you for your input its appreciatedz

 

a couple of my buddies run that set up and have no interference ( on 3" springs )