Welding Reinforcement
Thread Starter
JK Freak
Joined: Jun 2009
Posts: 662
Likes: 0
From: Monterey, CA
Welding Reinforcement
I'm taking my Jeep in tomorrow to get EVO gussets, sleeves and LCA skids installed. Since it'll be in the shop getting welding done, I'm wondering if there are any brackets or anything that would be good to reinfoce with a bead of weld.
I have the Teraflex rear trackbar axle bracket, so I think I'm good there. Anywhere else that would be good to get a spot of weld while I have the chance?
I've heard to get the front lower control arm brackets are only welded on one side (outside?), that I should get the insides welded up too.
I finally won't have to cringe everytime I go off a drop!!!
Pictures are always welcome.
I have the Teraflex rear trackbar axle bracket, so I think I'm good there. Anywhere else that would be good to get a spot of weld while I have the chance?
I've heard to get the front lower control arm brackets are only welded on one side (outside?), that I should get the insides welded up too.
I finally won't have to cringe everytime I go off a drop!!!
Pictures are always welcome.
Last edited by FlameRed; Sep 10, 2009 at 02:13 PM.
