Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

What is taking soo long??

Thread Tools
 
Old Dec 3, 2007 | 04:04 AM
  #1  
jerzeyjeep's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2007
Posts: 547
Likes: 1
From: neptune
Default What is taking soo long??

The jk has been out for over a year now and the aftermarket still hasn't produced a single programmer for the 3.8.

lets face it the jk is going to be around for a while as will the 3.8

how long are we going to have to wait???
Reply
Old Dec 3, 2007 | 04:14 AM
  #2  
hurstrescue's Avatar
JK Freak
 
Joined: Mar 2007
Posts: 710
Likes: 0
From: Atlanta, GA
Default

Would be nice if the programmer could control when you could switch on the locker, instead of having to modify the wiring to trick it. Then be able to return it to stock before taking it in for service. Same with the sway bar disconnect, or really all of the programmable features.
Reply
Old Dec 3, 2007 | 04:15 AM
  #3  
naplesrubicon's Avatar
JK Enthusiast
 
Joined: Oct 2007
Posts: 277
Likes: 1
From: naples,florida
Default

hypertech makes one and jet has an add on
Reply
Old Dec 3, 2007 | 04:18 AM
  #4  
jerzeyjeep's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2007
Posts: 547
Likes: 1
From: neptune
Default

i am looking for a programmer to adjust or remove the esp, control some motor functions and get rid of the damn delay in rpms when you get off the gas.

is that too much to ask??

when i had my ranger there were guys on there who took superchips programmers and modified them and sold them. i am no where near skilled enough with computers to do that but i am reall surprised no one on here is!!
Reply
Old Dec 3, 2007 | 04:39 AM
  #5  
davebloomer's Avatar
JK Super Freak
 
Joined: Oct 2007
Posts: 1,233
Likes: 1
From: Mcalester, OK
Default

Originally Posted by jerzeyjeep
The jk has been out for over a year now and the aftermarket still hasn't produced a single programmer for the 3.8.

lets face it the jk is going to be around for a while as will the 3.8

how long are we going to have to wait???
hmmm they never put out the programmer for the 3.8 in my chrysler minivan either

but in all seriousness i would love to have one to adjust a few settings like esp.
Reply
Old Dec 3, 2007 | 07:20 AM
  #6  
Hypertech's Avatar
Sponsoring Manufacturer
Hypertech Representative
 
Joined: Nov 2007
Posts: 357
Likes: 1
From: Bartlett, TN
Default

Originally Posted by jerzeyjeep
The jk has been out for over a year now and the aftermarket still hasn't produced a single programmer for the 3.8.

lets face it the jk is going to be around for a while as will the 3.8

how long are we going to have to wait???
Hypertech's tuner for the JK is currently in Alpha testing, so it could be released before the holidays. Anyway I do have a dyno chart and a list of the available tuning features.

Reply
Old Dec 3, 2007 | 07:39 AM
  #7  
SaleenPowr's Avatar
JK Enthusiast
 
Joined: Jan 2007
Posts: 241
Likes: 0
From: Tampa, FL
Default

Originally Posted by Darnell
Hypertech's tuner for the JK is currently in Alpha testing, so it could be released before the holidays. Anyway I do have a dyno chart and a list of the available tuning features.

Are those numbers at the wheel? SAE?
Reply
Old Dec 3, 2007 | 08:58 AM
  #8  
jerzeyjeep's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2007
Posts: 547
Likes: 1
From: neptune
Default

i see we can get more power but can we control anyother systems in our jeep???
Reply
Old Dec 3, 2007 | 12:49 PM
  #9  
00pumpkin's Avatar
JK Freak
 
Joined: May 2007
Posts: 598
Likes: 0
From: Roswell, GA
Default

How much?????
Reply
Old Dec 3, 2007 | 01:01 PM
  #10  
Littlejon's Avatar
JK Junkie
 
Joined: May 2007
Posts: 2,262
Likes: 1
From: Des Moines, Iowa
Default

Reply



All times are GMT -8. The time now is 05:05 PM.