392 Wrangler suspension on a Sport
 

I know there has been threads about this, but I thought I would post about my experience. I recently purchased the full suspension for a 392 wrangler with 5 thousand miles on it. To install on our JLU Sport. I got the springs, all 8 control arms, both track bar, swaybar end links, and the Fox shocks. All the control arms had the same part # as my control arms on my JLU Sport. The front track bar was a different length so I used it, but the rear was the same part # as the Sport. The Sway bar end links where longer so I used those. And of course I used the coil springs and the shocks. I was hoping to get 1 to 1 1/2 inch of lift. Like you do putting Rubicon springs on a sport. I didn't want to much. But after it was installed I gained 3 inches of lift. The ride is just a good or maybe a little better then it was stock.
Here are some before and after pictures. I really liked the Tan top but the wife did not. Since it was her Jeep I put a black one on.
https://cimg1.ibsrv.net/gimg/www.jk-...b76ca15df2.jpg
Stock before changing anything. Wife did not loke the Tan soft top.
https://cimg2.ibsrv.net/gimg/www.jk-...7ef657f30a.jpg
With the new black soft top and the 392 wheels and tires, no lift yet.
https://cimg3.ibsrv.net/gimg/www.jk-...efa86aa9b8.jpg
With the lift installed.
https://cimg4.ibsrv.net/gimg/www.jk-...7bb0b23cb5.jpg
With the lift installed.
https://cimg5.ibsrv.net/gimg/www.jk-...22f9cf4aa8.jpg