New member
#3
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Ohio
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
The usual stuff like flat fender flares, different set of wheels, rear bumper, rocker guards ext... really just anything and everything till i feel like I'm done
#6
JK Enthusiast
Join Date: Sep 2016
Location: Overland Park, KS
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Did you get those installed yourself? How difficult was it? Looking to do something more to my rig, just not sure how much I want to spend or how much time I have right now b/c of work.
Trending Topics
#8
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Ohio
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I got mine off of amazon and they ran me around 150 with shipping and installation wasn't bad at all, all you have to do is pop the headlight out of the whole assembly then take the whole headlight assembly out and it gets put in the oven to heat the silicone up so you can take the cover off. After that the halo went on with 3m tape that was provided and run the wires out the back after they are in place, then put more silicone on and put the cover back on after halo is in. Put the assembly and the bulb back in your jeep and the only thing you have to do is ground the wire and splice the other into whatever lights you want them to come on with.(I did mine into the parking lights)
#10
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Ohio
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts