DJ1

Hey guys, unless you all are allergic to shrimp, I'll also fire up a louisiana shrimp boil on my double jet cooker with an assortment of hot sauces on the side. Least I can do is make some lunch. I'll let someone else worry about the soda/drinks, etc.

familytime

I'm good for shrimp just have those coming pitch in

orangedude71

I have no shortage of work to do on my rig. The c's have been sitting in my garage for a year., I've got a bent track bar and need to get my skid plates from banging my exhaust and maybe do a sector shaft brace. Maybe I'll bring my pile of parts, and some beverages and deserts.

DJ1

Sounds good Mark. I'll put you on the list as a maybe

ade

So have sidelined the 24th to come and help wrench. Will need directions to location though..

richlortz

I guess an address would help. 4546 Peralta blvd, Fremont. Suite #6,7. Across the street from THE PARTS HOUSE Auto Parts Between Dusterberry and Central ave.

ade

Thanks Rich.

See you on the 24th sir, with elbows pre-greased for wrenching..

DJ1

Hey guys quick question, will we have the angled adapters already to help with install for the ball joints? I know they necessarily don't have to be used but if it makes things easier...

ronjenx posted this on another thread...


Mark posted this on the same thread
http://www.amazon.com/OTC-Dodge-Join...iglink20512-20

richlortz

I don't have that particular adaptor. I just use washers and haven't had any problems.

spinuck

Looks like I might need new ball joints too. I had Synergy HD ball joints installed last spring, but last night on the way home, I was getting some vibrations. Changed out the unit bearing just to see if that might be it, but there is still some decent amount of play in the front driver tire.... Checking with Synergy about getting them replaced under warranty, since they're still within the 12 months. See you on the 24th!