JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

dosent look right to me

Thread Tools
 
Old Sep 27, 2007 | 05:01 PM
Share
  #1  
Krypler's Avatar
Krypler
Thread Starter
JK Newbie
 
Joined: Sep 2007
Posts: 55
Likes: 0
From: Greenville, TX
Default dosent look right to me


This dose not look right to me this is the one of the front sway bar links should it be tighter than what it is?

and here is tyhe other side both look loose what do you guys think?



Thanks for you help guys
Reply
0
Old Sep 27, 2007 | 05:05 PM
Share
  #2  
KCTW's Avatar
KCTW
JK Freak
 
Joined: Sep 2007
Posts: 740
Likes: 0
From: Lanark IL
Default
Just guessing, but did your swaybar get slid over towards the drivers side?
Reply
0
Old Sep 27, 2007 | 05:07 PM
Share
  #3  
Krypler's Avatar
Krypler
Thread Starter
JK Newbie
 
Joined: Sep 2007
Posts: 55
Likes: 0
From: Greenville, TX
Default
i dont think so this superlift was just put one like last week.
Reply
0
Old Sep 27, 2007 | 05:09 PM
Share
  #4  
Krypler's Avatar
Krypler
Thread Starter
JK Newbie
 
Joined: Sep 2007
Posts: 55
Likes: 0
From: Greenville, TX
Default
when i turn hard right or left when backing up i hear a pop every now and then does this have anything to do with it?
Reply
0
Old Sep 27, 2007 | 05:13 PM
Share
  #5  
KCTW's Avatar
KCTW
JK Freak
 
Joined: Sep 2007
Posts: 740
Likes: 0
From: Lanark IL
Default
Does it look the same way were it mounts to the swaybar?
Reply
0
Old Sep 27, 2007 | 05:15 PM
Share
  #6  
mcnaught6's Avatar
mcnaught6
JK Freak
 
Joined: Jun 2007
Posts: 523
Likes: 0
From: Clarksville, TN - Fort Campbell
Default
are they up-side-down, or switched left and right?
Reply
0
Old Sep 27, 2007 | 05:19 PM
Share
  #7  
Krypler's Avatar
Krypler
Thread Starter
JK Newbie
 
Joined: Sep 2007
Posts: 55
Likes: 0
From: Greenville, TX
Default
here is the other ends



and

Reply
0

Trending Topics

Old Sep 27, 2007 | 05:30 PM
Share
  #8  
KCTW's Avatar
KCTW
JK Freak
 
Joined: Sep 2007
Posts: 740
Likes: 0
From: Lanark IL
Default
I am by no means A machanical genius, but those springs don't look right to me. Mabye its just the angle of the picture. Did you get your front end alined after the lift was installed?
Last edited by KCTW; Sep 27, 2007 at 05:52 PM.
Reply
0
Old Sep 27, 2007 | 05:32 PM
Share
  #9  
edstroyer's Avatar
edstroyer
JK Enthusiast
 
Joined: Feb 2007
Posts: 272
Likes: 0
From: Lehigh Valley, PA
Default
Those washers are not OEM washers... Im I correct? You can tell by the color tone and width.

I think thats the problem!
Reply
0
Old Sep 27, 2007 | 05:39 PM
Share
  #10  
Krypler's Avatar
Krypler
Thread Starter
JK Newbie
 
Joined: Sep 2007
Posts: 55
Likes: 0
From: Greenville, TX
Default
no there not in the instructions it says to use them.
Reply
0



Advanced Search

All times are GMT -8. The time now is 02:00 PM.