Proforged 1,000,000 mile warranty ball joints
Thread Starter
JK Freak
Joined: Sep 2007
Posts: 681
Likes: 1
From: B.E.A.Utiful Patterson, CA
Does anyone have any experience with these? I am going through the stockers too fast.
hxxp://catalog.proforged.com/index.p...econfigID=8225
Seem inexpensive, curious to know how well they cover the warranty if there is a problem.
hxxp://catalog.proforged.com/index.p...econfigID=8225
Seem inexpensive, curious to know how well they cover the warranty if there is a problem.
Last edited by mkjeep; Nov 15, 2011 at 11:40 AM.
Thread Starter
JK Freak
Joined: Sep 2007
Posts: 681
Likes: 1
From: B.E.A.Utiful Patterson, CA
Sponsoring Manufacturer
Joined: Jun 2010
Posts: 892
Likes: 2
1. This Limited Warranty is non-transferrable and applies only to the original purchaser and only for the original vehicle on which parts are installed. This Limited Warranty applies only to PROFORGED chassis parts installed on passenger vehicles, vans and light trucks and does not cover products installed on vehicles or equipment used in any of the following circumstances: towing, racing, security, government and public service, fleet or commercial uses, off-road use (whether recreational or competitive), agricultural use, aviation, industrial, marine or motorcycle uses. Further, this Limited Warranty does not apply to any PROFORGED product which has been subject to misuse, neglect, abuse, accident, improper maintenance or misapplication, or which has been connected, installed, modified, adjusted or repaired by someone other than a qualified, licensed automotive mechanic or in a manner that does not conform to the vehicle's factory service manual or other instructions provided by the vehicle manufacturer.
It doesn't answer your original question if the quality/durability, but the warranty is out for off-roaders.
From their site BTW.
It doesn't answer your original question if the quality/durability, but the warranty is out for off-roaders.
From their site BTW.
Last edited by Dynomax; Nov 15, 2011 at 12:49 PM. Reason: I beat D_engel by 3 minutes. ;)
JK Junkie
Joined: Sep 2010
Posts: 2,539
Likes: 2
From: Tempe AZ
"This Limited Warranty applies only to PROFORGED chassis parts installed on passenger vehicles, vans and light trucks and does not cover products installed on vehicles or equipment used in any of the following circumstances: towing, racing, security, government and public service, fleet or commercial uses, off-road use (whether recreational or competitive), agricultural use, aviation, industrial, marine or motorcycle uses."
Bull crap....
Well, Dynomax beat me to it.
Bull crap....
Well, Dynomax beat me to it.
Last edited by D_engel; Nov 15, 2011 at 12:39 PM. Reason: Dynomax made me look like an ass.
JK Enthusiast
Joined: Apr 2009
Posts: 233
Likes: 0
From: atlanta
Not the question you asked, but I am really impressed with my Dynatrac ProSteer ball joints. They are really strong and rebuidable. Expensive, but I have no reason to doubt they will last the lift of the jeep - with 37s.
Sponsoring Manufacturer
Joined: Jun 2010
Posts: 892
Likes: 2
"This Limited Warranty applies only to PROFORGED chassis parts installed on passenger vehicles, vans and light trucks and does not cover products installed on vehicles or equipment used in any of the following circumstances: towing, racing, security, government and public service, fleet or commercial uses, off-road use (whether recreational or competitive), agricultural use, aviation, industrial, marine or motorcycle uses."
Bull crap....
Well, Dynomax beat me to it.
Bull crap....
Well, Dynomax beat me to it.
