Teraflex 2.5 coil install....Tools needed

Reply Subscribe

Thread Tools

Nov 7, 2012 | 06:19 AM

jb0974

Thread Starter

JK Newbie

Joined: Mar 2010

Posts: 27

Likes: 0

From: huntersville, nc

Teraflex 2.5 coil install....Tools needed

I am installing this weekend. 1st lift install. Other than jack, jack stands and cooler full of beer what tools will I need?

Thanks!!!

Nov 7, 2012 | 06:42 AM

Krieger

JK Enthusiast

Joined: Feb 2011

Posts: 176

Likes: 0

From: La Habra California

If you bought the kit new it should come with instructions and a tool list. Pretty much you will need wrenches, socket sets
and a Torque wrench.

Nov 7, 2012 | 07:34 AM

bob-o

JK Junkie

Joined: Jun 2012

Posts: 2,215

Likes: 2

From: rosamond, ca

You will need a drill and some bits to mount the rear track bar bracket to the frame on passenger side unless the kit came with the axle track bar bracket.

Nov 7, 2012 | 08:17 AM

619 JK

JK Enthusiast

Joined: Aug 2011

Posts: 146

Likes: 0

From: San Diego, CA

You can borrow a spring compressor from Autozone or some other places with a small deposit which would make the install easier.

Nov 7, 2012 | 08:32 AM

Ncb

JK Super Freak

Joined: Feb 2012

Posts: 1,087

Likes: 2

From: Parker, Colorado

Harbor Freight sells Pittsburg brand torque wrenches and with a coupon you can get a 75-150 ft/lb wrench for cheap. I have one and it's just as accurate as the Snap-On wrenches I have that get calibrated every year.