Beginning my build soon. Parts to be available for sale.....08' Unlimited Rubicon!!!!
Thread Starter
JK Enthusiast
Joined: Sep 2011
Posts: 258
Likes: 0
From: Indio, CA
Beginning my build soon. Parts to be available for sale.....08' Unlimited Rubicon!!!!
Hi everybody! Well like the title says, I will be starting my build soon, hopefully in a couple of weeks and should have lots of OEM parts from my 08' JKU Rubicon for sale. This build will be a complete ground up project replacing axles,wheels/tires and suspension components. Other mods will be conducted as well, including bumpers/tire carrier and armor/body protection. Here is a quick list of equipment/parts that will be sold to help offset some of the costs:
Front and rear Rubicon axles
Front and rear drive shafts.
Rubicon wheels and tires
OEM Rear bumper
Complete OEM 08" JKU soft top (never installed).... Still deciding whether or not to sell this......
Factory coil springs and shocks
Track bars (OEM and after market)
Stock tie rod
Stock control arms (all)
OME Front coils
Bilstein 5100 series front shocks
Other stuff TBD....
In case anyone is interested, the Jeep currently has 22,045 miles on it. The rear diff got serviced at 10,000 miles and a new E-locker installed all under warranty. Wheels and tires are well used with typical scratches and abrasions.
I'm hoping to get started as soon as possible, but most likely this should happen in the latter part of January. If anyone is interested in any of this stuff, please drop me an e-mail (eraticnerve@aol.com) or PM me. Also note: I am located near Palm Springs, Ca and will be traveling between there and South Orange County during the build. Most of the big stuff will be on location in Orange County and can be readily available for pick-up. Other items will be back at home near palm Springs and can be delivered to most places in and around Southern Cal. I am not really interested in shipping any of this, so be prepared to drive. I can meet most if reasonable. I'm not afraid to use the freeway system out here in So. Cal.
Front and rear Rubicon axles
Front and rear drive shafts.
Rubicon wheels and tires
OEM Rear bumper
Complete OEM 08" JKU soft top (never installed).... Still deciding whether or not to sell this......
Factory coil springs and shocks
Track bars (OEM and after market)
Stock tie rod
Stock control arms (all)
OME Front coils
Bilstein 5100 series front shocks
Other stuff TBD....
In case anyone is interested, the Jeep currently has 22,045 miles on it. The rear diff got serviced at 10,000 miles and a new E-locker installed all under warranty. Wheels and tires are well used with typical scratches and abrasions.
I'm hoping to get started as soon as possible, but most likely this should happen in the latter part of January. If anyone is interested in any of this stuff, please drop me an e-mail (eraticnerve@aol.com) or PM me. Also note: I am located near Palm Springs, Ca and will be traveling between there and South Orange County during the build. Most of the big stuff will be on location in Orange County and can be readily available for pick-up. Other items will be back at home near palm Springs and can be delivered to most places in and around Southern Cal. I am not really interested in shipping any of this, so be prepared to drive. I can meet most if reasonable. I'm not afraid to use the freeway system out here in So. Cal.
Last edited by bonebreak98; Jan 7, 2013 at 10:28 PM.
JK Super Freak
Joined: May 2011
Posts: 1,000
Likes: 0
From: North County San Diego, California
Hi everybody! Well like the title says, I will be starting my build soon, hopefully next month and should have lots of OEM parts from my 08' JKU Rubicon for sale. This build will be a complete ground up project replacing axles,wheels/tires and suspension components. Other mods will be conducted as well, including bumpers/tire carrier and armor/body protection. Here is a quick list of equipment/parts that will be sold to help offset some of the costs:
Front and rear Rubicon axles
Front and rear drive shafts.
Rubicon wheels and tires
OEM Rear bumper
Complete OEM 08" JKU soft top (never installed).... Still deciding whether or not to sell this......
Factory coil springs and shocks
Track bars (OEM and after market)
Stock tie rod
Stock control arms (all)
OME Front coils
Bilstein 5100 series front shocks
Other stuff TBD....
In case anyone is interested, the Jeep currently has 22,045 miles on it. The rear diff got serviced at 10,000 miles and a new locker installed all under warranty. Wheels and tires are well used with typical scratches and abrasions.
I'm hoping to get started as soon as possible, but most likely this should happen in the latter part of January. If anyone is interested in any of this stuff, please drop me an e-mail (eraticnerve@aol.com) or PM me. Also note: I am located near Palm Springs, Ca and will be traveling between there and South Orange County during the build. Most of the big stuff will be on location in Orange County and can be readily available for pick-up. Other items will be back at home near palm Springs and can be delivered to most places in and around Southern Cal. I am not really interested in shipping any of this, so be prepared to drive. I can meet most if reasonable. I'm not afraid to use the freeway system out here in So. Cal.
Front and rear Rubicon axles
Front and rear drive shafts.
Rubicon wheels and tires
OEM Rear bumper
Complete OEM 08" JKU soft top (never installed).... Still deciding whether or not to sell this......
Factory coil springs and shocks
Track bars (OEM and after market)
Stock tie rod
Stock control arms (all)
OME Front coils
Bilstein 5100 series front shocks
Other stuff TBD....
In case anyone is interested, the Jeep currently has 22,045 miles on it. The rear diff got serviced at 10,000 miles and a new locker installed all under warranty. Wheels and tires are well used with typical scratches and abrasions.
I'm hoping to get started as soon as possible, but most likely this should happen in the latter part of January. If anyone is interested in any of this stuff, please drop me an e-mail (eraticnerve@aol.com) or PM me. Also note: I am located near Palm Springs, Ca and will be traveling between there and South Orange County during the build. Most of the big stuff will be on location in Orange County and can be readily available for pick-up. Other items will be back at home near palm Springs and can be delivered to most places in and around Southern Cal. I am not really interested in shipping any of this, so be prepared to drive. I can meet most if reasonable. I'm not afraid to use the freeway system out here in So. Cal.
Thanks,
Nick
JK Enthusiast
Joined: Nov 2010
Posts: 326
Likes: 1
From: Fontana, California
Hi everybody! Well like the title says, I will be starting my build soon, hopefully next month and should have lots of OEM parts from my 08' JKU Rubicon for sale. This build will be a complete ground up project replacing axles,wheels/tires and suspension components. Other mods will be conducted as well, including bumpers/tire carrier and armor/body protection. Here is a quick list of equipment/parts that will be sold to help offset some of the costs:
Front and rear Rubicon axles
Front and rear drive shafts.
Rubicon wheels and tires
OEM Rear bumper
Complete OEM 08" JKU soft top (never installed).... Still deciding whether or not to sell this......
Factory coil springs and shocks
Track bars (OEM and after market)
Stock tie rod
Stock control arms (all)
OME Front coils
Bilstein 5100 series front shocks
Other stuff TBD....
In case anyone is interested, the Jeep currently has 22,045 miles on it. The rear diff got serviced at 10,000 miles and a new locker installed all under warranty. Wheels and tires are well used with typical scratches and abrasions.
I'm hoping to get started as soon as possible, but most likely this should happen in the latter part of January. If anyone is interested in any of this stuff, please drop me an e-mail (eraticnerve@aol.com) or PM me. Also note: I am located near Palm Springs, Ca and will be traveling between there and South Orange County during the build. Most of the big stuff will be on location in Orange County and can be readily available for pick-up. Other items will be back at home near palm Springs and can be delivered to most places in and around Southern Cal. I am not really interested in shipping any of this, so be prepared to drive. I can meet most if reasonable. I'm not afraid to use the freeway system out here in So. Cal.
Front and rear Rubicon axles
Front and rear drive shafts.
Rubicon wheels and tires
OEM Rear bumper
Complete OEM 08" JKU soft top (never installed).... Still deciding whether or not to sell this......
Factory coil springs and shocks
Track bars (OEM and after market)
Stock tie rod
Stock control arms (all)
OME Front coils
Bilstein 5100 series front shocks
Other stuff TBD....
In case anyone is interested, the Jeep currently has 22,045 miles on it. The rear diff got serviced at 10,000 miles and a new locker installed all under warranty. Wheels and tires are well used with typical scratches and abrasions.
I'm hoping to get started as soon as possible, but most likely this should happen in the latter part of January. If anyone is interested in any of this stuff, please drop me an e-mail (eraticnerve@aol.com) or PM me. Also note: I am located near Palm Springs, Ca and will be traveling between there and South Orange County during the build. Most of the big stuff will be on location in Orange County and can be readily available for pick-up. Other items will be back at home near palm Springs and can be delivered to most places in and around Southern Cal. I am not really interested in shipping any of this, so be prepared to drive. I can meet most if reasonable. I'm not afraid to use the freeway system out here in So. Cal.
Thread Starter
JK Enthusiast
Joined: Sep 2011
Posts: 258
Likes: 0
From: Indio, CA
