Installed an RE 2.5" lift about a month ago... This morning I noticed a sound whenever it sways and when I turn...it kinda sounds like a squeak...like it could be rubber from the sway bars rubbing but before I go under and break things down I wanted to see if anyone might've ran into the same issue and point me in the right direction.

 

Bump. Any suggestions?

 

Start spraying parts with fluid film/wd40. When the squeak goes away, you found the location.

 

Thanks bro...what about white lithium grease?

 

Big fan of Fluid film here. Coated all my suspension joints, arms, etc.

 

I'm gonna have to try it....I sprayed the lithium grease and it looks clunky and white...but it did take the squeak away....fluid film it is. Thanks!

 

Check your mounting hardware, they may have loosened up, that happened to me

 

Common offenders I've found are rear sway bar links, rear shock mounts, and upper front shock mounts.

Makes a metallic bouncing noise and it is enraging!

 

You need something that penetrates. lithium is good for assembly purposes but not penetration.

 

Sounds similar to an issue I had a few weeks ago. The bolt on the other side of the sway bar disconnect was loose. I was getting a clicking sound when the jeeps weight shifted