I am going with 37x13.5x16 tires on procomp 7089's 10 inch wide with 4.5 inch backspace.

Will this tire width and backspacing rub at full turn/flex?

Sorry to keep posting up questions....thanks for the support everyone!!!

 

Check this thread

https://www.jk-forum.com/forums/modified-jk-tech-2/pro-comp-wheels-70054/

I would say yes, you'll have some rubbing.

 

they probably not gonna rub on the inside anyway, I'd like to see that tire and wheel combo on a JK in a pic !!

 

i have 35's on a 10 inch wide 16 inch tall 7089 and they rub a little in the rear during full flex with a FT 3 inch lift

hope that helps

 

your look really good with 10 '' !!!

 

Are they 13.5" or 12.5" wide?

 

12.5 im goin to 13.5 and 36"s real soon

 

How much lift? turning i dont know; however, unless you are running tube fenders you may get flex rubbing w/ less than 4+" of lift.

 

I have 35x12.50R15's now, and at full flex I rub the rear fenders.

 

thanks to all!!!

well, i am still sort of "on the fence" on this one....

17x9 with 4.75 inch bs and 1.5 inch spacers.

or....

16x10 with 4.5 inch bs and hope they dont rub.

i am not really conerned with the flex rub on the fenders bc i can always throw on a 1" body lift and/or flat fender if necessary. i am more concerned with the rub on the arms and such at full turn. this is stressful. ha.

thanks again everyone.