Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

AEV Procal High Idle not working?

Thread Tools
 
Old Feb 8, 2009 | 08:42 AM
  #1  
mmccurdy's Avatar
Thread Starter
JK Super Freak
 
Joined: Oct 2006
Posts: 1,045
Likes: 0
From: Santa Clara, CA
Default AEV Procal High Idle not working?

Got my AEV Procal this week, and had an occasion to try out the high idle yesterday while airing up. I set the switches according to the reference card (double and triple checked), and plugged it in while engine was running and e-brake engaged. Nothing happened. It says to use the "overhead light dimmer" on the multifunction stalk to adjust the idle -- which I'm assuming is the thing that sets dash illumination and then ultimately turns on the dome light -- but playing with that also had no effect.

Is this working for everyone else? Am I doing something wrong?

Speedometer re-calibration and check engine clearing work great....
Reply
Old Feb 8, 2009 | 08:50 AM
  #2  
Suffolk JK's Avatar
JK Junkie
 
Joined: Jan 2008
Posts: 2,319
Likes: 0
From: Long Island, NY
Default

Worked for me. Set the e-brake and plugged it in.

If the stalk is on the setting for the interior lights to come on the idle goes back to normal. Once you enter into the threshold of the dimming part, it starts to raise or lower.
Reply




All times are GMT -8. The time now is 09:51 AM.