So What Was Done to Your Jeep This Week?
I almost replaced most of the things. Here is the link to pictures
Taher's Awesome JKU Build | Facebook
Mods done so far
AEV tuned Blistein 5160
EVO 3 inch coil springs
Teraflex Elite Long arms
Sumo spring bump stops
Synergy Suspension Jeep JK Rear Coil Wedges
1/2 inch front coil spacers
Toyo 35x12.5x17
Mickey Thompson's popular Classic II
Stonehenge Chubby 2.0 Bumper
KOR bumper and tire carrier
Evo Rear Lower Control Arm Skids
Evo Front Control Arm Skids
Evo C2 Axle Gussets
Evo 44 Magnum Seale
Dynatrac Prosteer
Snergy Tie Rod with Steering Stabilizer Clamp
Evo drag link flip
Coast front and rear driveshaft
Synergy Rear Track Bar Bracket
JKS front and rear track bar
Rock 12000LBS with Synthetic rope
Airaid Cold air intake
LED rock lights
50 inch LED light with N-Fab light bar
Rigid Dually on KOR bumper
LED Fog Lights
Rugged Ridge handle bars
Vector Offroad Multi-Purpose Table
Dominion OffRoad on board air system
Coverking Seat Covers
Seat Heaters
Best Top under seat drawer
Rotopax water and gas carrier with lock
telescopic read LED mount
Taher's Awesome JKU Build | Facebook
Mods done so far
AEV tuned Blistein 5160
EVO 3 inch coil springs
Teraflex Elite Long arms
Sumo spring bump stops
Synergy Suspension Jeep JK Rear Coil Wedges
1/2 inch front coil spacers
Toyo 35x12.5x17
Mickey Thompson's popular Classic II
Stonehenge Chubby 2.0 Bumper
KOR bumper and tire carrier
Evo Rear Lower Control Arm Skids
Evo Front Control Arm Skids
Evo C2 Axle Gussets
Evo 44 Magnum Seale
Dynatrac Prosteer
Snergy Tie Rod with Steering Stabilizer Clamp
Evo drag link flip
Coast front and rear driveshaft
Synergy Rear Track Bar Bracket
JKS front and rear track bar
Rock 12000LBS with Synthetic rope
Airaid Cold air intake
LED rock lights
50 inch LED light with N-Fab light bar
Rigid Dually on KOR bumper
LED Fog Lights
Rugged Ridge handle bars
Vector Offroad Multi-Purpose Table
Dominion OffRoad on board air system
Coverking Seat Covers
Seat Heaters
Best Top under seat drawer
Rotopax water and gas carrier with lock
telescopic read LED mount
Got my 4.88 gears installed finally after chewing up my front ring gear last week! Loving the new gears compared to the old 3.73s.
Replaced SS with FOX 2.0 and relocated it higher.
Installed a used LOD rear bumper & tire carrier, with trail rack, and rotopax mounts. PITA to do by myself, but no rattles, so can't complain.
Replaced stock front driveshaft with a Coast 1310.
Changed my gear oil this morning (1000 miles after new gear install) and an engine oil change.
Couple pics:




Got my Mopar Trans Aux Cooler waiting to be installed, maybe next weekend if I find the time. Also received the red LEDs I ordered to be installed on the window switch bezel since the stock bulbs burnt out years ago.
Replaced SS with FOX 2.0 and relocated it higher.
Installed a used LOD rear bumper & tire carrier, with trail rack, and rotopax mounts. PITA to do by myself, but no rattles, so can't complain.
Replaced stock front driveshaft with a Coast 1310.
Changed my gear oil this morning (1000 miles after new gear install) and an engine oil change.
Couple pics:
Got my Mopar Trans Aux Cooler waiting to be installed, maybe next weekend if I find the time. Also received the red LEDs I ordered to be installed on the window switch bezel since the stock bulbs burnt out years ago.



