So What Was Done to Your Jeep This Week?
JK Jedi
Joined: Feb 2012
Posts: 6,546
Likes: 2
From: Panorama city,Ca
Got into a little fender bender.....
Jeep-1
Buick-0
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433300"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433301"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433298"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433299"/>
Jeep-1
Buick-0
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433300"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433301"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433298"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=433299"/>
Evo bumper next?
I saw a picture of the evo bumper totalled a accorded
JK Enthusiast
Joined: Dec 2012
Posts: 108
Likes: 0
From: Athens Texas
Can you give more details...... Brand and where you bought it?
JK Enthusiast
Joined: Nov 2012
Posts: 135
Likes: 0
From: Carlsbad
Brand: DP Video from Fry's electronics $99. Comes with monitor/mirror, camera, wiring, but no mount. Use L bracket or mount flush (harder). I chose L bracket because I will be changing my bumper. I think you should be able to buy a bracket from them straight. The monitor clamps to existing mirror.
My ideal set up would have been to wire it to both reverse lamp and ignition but it doesn't allow that. So you have to choose whether you want your source to be reverse only or ignition only (always on). I chose to wire to ignition so it's always on. Since it's part of the mirror I use it as part of driving, however there is a power button to turn it off manually, like at night when it's too bright, although you can adjust that too. Resolution is better than expected for a 100 bucks.
Great mod for the money although I did get stuck and p/o when there wasn't enough cable and no bracket so paid an electrician $75 to finish the wiring. Fry's will charge $180 for installation. The cable included is not long enough, you will need to buy longer cable. Hooked up to fuse M11 on my 2012.
Recommended for all vehicles with rear views obstructed by two big headrests, large round rubber, a third brake light, and sitting up high. Sound familiar? Good luck.
My ideal set up would have been to wire it to both reverse lamp and ignition but it doesn't allow that. So you have to choose whether you want your source to be reverse only or ignition only (always on). I chose to wire to ignition so it's always on. Since it's part of the mirror I use it as part of driving, however there is a power button to turn it off manually, like at night when it's too bright, although you can adjust that too. Resolution is better than expected for a 100 bucks.
Great mod for the money although I did get stuck and p/o when there wasn't enough cable and no bracket so paid an electrician $75 to finish the wiring. Fry's will charge $180 for installation. The cable included is not long enough, you will need to buy longer cable. Hooked up to fuse M11 on my 2012.
Recommended for all vehicles with rear views obstructed by two big headrests, large round rubber, a third brake light, and sitting up high. Sound familiar? Good luck.
JK Super Freak
Joined: Oct 2012
Posts: 1,007
Likes: 0
From: Cali
Brand: DP Video from Fry's electronics $99. Comes with monitor/mirror, camera, wiring, but no mount. Use L bracket or mount flush (harder). I chose L bracket because I will be changing my bumper. I think you should be able to buy a bracket from them straight. The monitor clamps to existing mirror.
My ideal set up would have been to wire it to both reverse lamp and ignition but it doesn't allow that. So you have to choose whether you want your source to be reverse only or ignition only (always on). I chose to wire to ignition so it's always on. Since it's part of the mirror I use it as part of driving, however there is a power button to turn it off manually, like at night when it's too bright, although you can adjust that too. Resolution is better than expected for a 100 bucks.
Great mod for the money although I did get stuck and p/o when there wasn't enough cable and no bracket so paid an electrician $75 to finish the wiring. Fry's will charge $180 for installation. The cable included is not long enough, you will need to buy longer cable. Hooked up to fuse M11 on my 2012.
Recommended for all vehicles with rear views obstructed by two big headrests, large round rubber, a third brake light, and sitting up high. Sound familiar? Good luck.