Work Program / Community Service!
JK Freak
Joined: Aug 2008
Posts: 608
Likes: 0
From: Birmingham, Al
I plan on doing the work on my jeep 10/2/08 sometime that afternoon after i get off of work. I am putting a 2.5'' skyjacker lift and a set of 5 wheels and tires, we also try to figure out a way to mount my high jack to front or rear bumper.
Any one that is willing to help is welcome to the beer in my frig. as pay.
Lance
Any one that is willing to help is welcome to the beer in my frig. as pay.
Lance
Last edited by ink42o; Sep 27, 2008 at 03:16 PM.
Thread Starter
JK Super Freak
Joined: Sep 2007
Posts: 1,440
Likes: 0
From: Woodstock, GA
I plan on doing the work on my jeep 8/2/08 sometime that afternoon after i get off of work. I am putting a 2.5'' skyjacker lift and a set of 5 wheels and tires, we also try to figure out a way to mount my high jack to front or rear bumper.
Any one that is willing to help is welcome to the beer in my frig. as pay.
Lance
Any one that is willing to help is welcome to the beer in my frig. as pay.
Lance
JK Freak
Joined: Aug 2008
Posts: 608
Likes: 0
From: Birmingham, Al
Work day has changed to 10/3/08. I know most people have to work on Fri so no big deal if no body can make it, just putting it out there if anyone could make it i would love to have someone that has put in a lift before.
Thread Starter
JK Super Freak
Joined: Sep 2007
Posts: 1,440
Likes: 0
From: Woodstock, GA
Sorry man put I do have to work on 10/03 and 10/04!
Thread Starter
JK Super Freak
Joined: Sep 2007
Posts: 1,440
Likes: 0
From: Woodstock, GA
Work day on 09/28!
Sorry Mike, but I had to let everyone know!
So Mike and I chooped up a front bumper in an attempt on making a stubby, and we did succeed! Here is the product we developed after about 3-4 hours of work!
After all the cutting we finally found the right cuts to get the bumper to fold on itself to make decent looking endcaps (we hope
)
The problem we have is welding the plastic, does anyone have experience?
And no our bumpers are fine, this was a free one, hurstrescue this is what is left from your bumper
One thing we did finish was the install of 12 washers on Mike's seats so they sit at the correct angle!
So Mike and I chooped up a front bumper in an attempt on making a stubby, and we did succeed! Here is the product we developed after about 3-4 hours of work!
After all the cutting we finally found the right cuts to get the bumper to fold on itself to make decent looking endcaps (we hope
)The problem we have is welding the plastic, does anyone have experience?
And no our bumpers are fine, this was a free one, hurstrescue this is what is left from your bumper
One thing we did finish was the install of 12 washers on Mike's seats so they sit at the correct angle!
Thread Starter
JK Super Freak
Joined: Sep 2007
Posts: 1,440
Likes: 0
From: Woodstock, GA
Thread Starter
JK Super Freak
Joined: Sep 2007
Posts: 1,440
Likes: 0
From: Woodstock, GA
So is there anyone that has plans to do any mod's in the next few weeks?
I know there are a few of us who have ordered body lifts and some other things that need to be put on!
Mike and I are still working on the stubby bumper modification!
I know there are a few of us who have ordered body lifts and some other things that need to be put on!
Mike and I are still working on the stubby bumper modification!
JK Enthusiast
Joined: Feb 2008
Posts: 451
Likes: 0
From: Alpharetta, GA
My body lift will be in for sure early this week. Our Woods SS looks to be in about the same time. I'm still thinking rock sliders but can't pick which ones. Anyone have ideas? I'm liking the Teraflex and PSC. So it seems I will still be looking to get more work done after this week also.
Just tracked my body lift....out for delivery today....wohooooo
Just tracked my body lift....out for delivery today....wohooooo
Last edited by TINMAN_2469; Oct 6, 2008 at 05:11 AM.