Hella 500 and windsheild bracket KIT $99.99 shipped
Thread Starter
Sponsoring Vendor
ORW Representative
ORW Representative
Joined: Aug 2010
Posts: 1,759
Likes: 3
From: San Diego, Mexico, Australia
https://www.jk-forum.com/forums/show...hipping-139.99
JK Newbie
Joined: Sep 2010
Posts: 17
Likes: 0
From: Southern Minnesota
Hi Dan, I am very interested in the Hella's and the KC brackets. Can you verify that they are the 500's that are about 6 inches wide and that the KC brackets will fit on a 2010 JK Unlimited. Your website says 07-09. Small detail I know , but just wanted to be sure. They (brakets) are KC-7316 and come with rock shield with KC emblem on them? Thanks a bunch. Look forward to ordering when I hear back from you.
Thread Starter
Sponsoring Vendor
ORW Representative
ORW Representative
Joined: Aug 2010
Posts: 1,759
Likes: 3
From: San Diego, Mexico, Australia
Hi Dan, I am very interested in the Hella's and the KC brackets. Can you verify that they are the 500's that are about 6 inches wide and that the KC brackets will fit on a 2010 JK Unlimited. Your website says 07-09. Small detail I know , but just wanted to be sure. They (brakets) are KC-7316 and come with rock shield with KC emblem on them? Thanks a bunch. Look forward to ordering when I hear back from you.
JK Freak
Joined: Aug 2010
Posts: 523
Likes: 1
From: Tehachapi, Ca.
Finally installed my black magic lights and I'm really digging how bright they are and the way they look, but for some reason the light in the switch isn't working. Just wondering if anyone else had that problem?
Thread Starter
Sponsoring Vendor
ORW Representative
ORW Representative
Joined: Aug 2010
Posts: 1,759
Likes: 3
From: San Diego, Mexico, Australia
JK Freak
Joined: Aug 2010
Posts: 523
Likes: 1
From: Tehachapi, Ca.
Yes, all three wires are hooked up. I connected the ground wire to a grounding point that's inside the cab, infront of the driver's door, and just left of the clutch pedal. I tapped into the electrical port that turns off when the key is off. So the lights only work when the key is on.
Thread Starter
Sponsoring Vendor
ORW Representative
ORW Representative
Joined: Aug 2010
Posts: 1,759
Likes: 3
From: San Diego, Mexico, Australia
Yes, all three wires are hooked up. I connected the ground wire to a grounding point that's inside the cab, infront of the driver's door, and just left of the clutch pedal. I tapped into the electrical port that turns off when the key is off. So the lights only work when the key is on.
Thread Starter
Sponsoring Vendor
ORW Representative
ORW Representative
Joined: Aug 2010
Posts: 1,759
Likes: 3
From: San Diego, Mexico, Australia