Inspired Engineering Revolver kit with OEM Brackets! Plug and play, 3k or 6k!
 

https://i20.photobucket.com/albums/b...psd8ec0ea2.jpg

Many people have shown interest in our Revolver series lights, and even more asked about them in white light, and with brackets to make them fit in the stock location.

We are proud to announce that we have just released both the White 6K Revolver and the OEM fitment brackets!

The specs on the Revolver light are as follows...

• 18 watts of total power, each
• 1400 lumen
• 3k Yellow light or 6k white light
• Lifetime warranty
• Plexiglas lens
• IP68 water resistant
• And much more...

Advantages of this kit are

• Maintains OEM look while upgrading lighting
• Plug and play for all JKs
• Fits most aftermarket and OEM bumpers
• Easy and quick install
• Draws almost no power
• No Flicker, or CANBUS issues
• Full range of adjust-ability
• Bracket and light are powder coated for durability

Currently only Spot pattern is available!

Stock is low so order soon. We will begin shipping these in a few days!

Don't Forget to use the discount code "JKBRKT" to save $34.99 on the purchase price!
Enough with the talking, here are some pics


https://i20.photobucket.com/albums/b...ps329f03da.jpg
https://i20.photobucket.com/albums/b...ps0951c49f.jpg
https://i20.photobucket.com/albums/b...ps1f4d42c7.jpg

https://i20.photobucket.com/albums/b...psb8afd694.jpg
https://i20.photobucket.com/albums/b...pse4adabdb.jpg
https://i20.photobucket.com/albums/b...psb623e17a.jpg
https://i20.photobucket.com/albums/b...ps06da355e.jpg
https://i20.photobucket.com/albums/b...ps38d0573a.jpg
https://i20.photobucket.com/albums/b...ps980953c1.jpg

I tried to order with the discount code and it doesn't work.

Yup, same here.

Sorry! I just got that fixed. They are going to take a few days to ship as we are still making the first batch of brackets.

I put in my order.

All orders shipped out! In stock and ready to ship! :ya::rock:

This doesn't suit my needs but is bad ass!

Thanks! Different strokes for different folks!

Have you installed these yet? Curious about the light output. Thanks

I need to rewrite the harness because mine got chewed up. Hopefully this week I will get it done. Then we can get together and you can see them in person.

Definitely, PM me when you get set up thx

Here is a crappy cell phone picture of how bright these are compared to the stock lights.

http://img.photobucket.com/albums/v5...ps034edce1.jpg

I will get a better picture of them installed in the bumper today. These fit awesome in my Rough Country Hybrid Stubby bumper. In fact they drown out my stock headlights. I need to get them aimed correctly and then I will get a good picture of how well they light up the world in front of you at night.

What about a closeup pic of how they fit in that bumper also?

Deleted - Sami is awesome to work with! Great communication, thank you! Looking forward to getting these installed in my Barricade Trail Force HD as soon as it arrives. Until then, I'll have to sit here and stare at the lights, lol

Here they are mounted in a Rough Country Hybrid Stubby:

http://img.photobucket.com/albums/v5...psc72fbb59.jpg

You have a PM!

Wow! It looks great on the RC bumper! Thanks for the pics :)

Ordered a set of the Revolvers about a week ago and they're really nice..I also used the code but shipping was automatically added.:thinking:

Looks good, how do they look when you're on the road? Are they spot or floods?

I'm torn between these and the JW speaker fog lights...

That looks very nice , might have to get myself a set, thanks for the pic

Mine are spots. My only complaint about the lights is that the pigtail harness is a little long (this is just my personal opinion). It could be shortened up a little bit since it plugs in where the bulb would normally plug in on the fog light it just leaves some extra wiring to zip tie together and tuck up out of the way. The bracket is easy to work with and slipped right onto the bumper.

The free shipping promo ended in June. Sami sent me a PM and explained that to me the other day. My bad, cuz I didn't read through the entire post. I found the code and jumped on it, LOL :thumbsup:

I'm guessing the reason for the long pigtail is for those that have aftermarket bumpers. Typically they sit further away from the factory wiring harness, so I say KUDOS to Inspired Engineering for having the foresight to give a little bit more wire to facilitate an aftermarket bumper! :thumbsup:

I understand that. I have an after market bumper that moved the lights outside the frame rails and the wiring is really long. But like I said a zip tie took care of it. I just said for me the wiring was a little long. I love the lights. They are super bright, and the bracket fits perfect on the Rough Country bumper. And it is very easy to aim the lights.

I'm thinking we will offer an option to have a shorter wire if that helps. For now anyone who reads this, just ask in the notes section of your order and we will shorten it!

I'm ready to order some of these lights with the brackets for the bumper and the shorter wire assembly. They come in fog or spot correct? I went on your site and could only find spot so could you pm me with a price on the fog please shipped to Quebec City Canada postal code is G0A 3K0 .

Just got them this morning and mounted them in my Rampage Marathon bumper before work! They are super bright, even during the day, but I forgot to take pics of them on.

What lights did you end up buying flood or spot?

when I selected the combo (brackets and lights) it gave a box to select but only showed spot. so that's what I got!

Ok, thanks I'll have to call them and ask if a flood is also available

I found something on my desk this morning which might interest you guys

https://i20.photobucket.com/albums/b...pscffa6a41.jpg

:wave:

Do you have flood and spot? I was waiting on a pm for my quote?

We should have the flood out within the next month or so. This one I posted above is a prototype we have to test the lens ans whatnot.

Do these bad boys plug right into the factory harness plug?

Sent from my LG-LS980 using JK-Forum

Street legal?

Yes they do!


They are not DOT approved.

Fit PSC

Attachment 549465



Attachment 549466

They look mean in the PSC bumper! I love it!

In stock and ready to ship!

Here's a few pics....they aren't that great, just infront of my garage

1 - Trucklite Headlights
2 - Revolver Fogs
3 - Both together
4 - with brights on

It should be noted - the fogs are freaking bright so I aimed them low so I don't blind people

We had some thick fog last night so I went out and tested my fog lights out. I found a nice deserted road and drove along. With my headlights on I couldn't see more than maybe a car length in front of me. So I turned the head lights off and the fog lights on with the lights aimed down a little bit I could see the signs on the side of the road and quite a ways ahead of me. I have the clear spots and the light is pure white and very bright. It makes my stock headlights look very yellow and really shows how bad they suck. I tried to take some pictures but they sucked on my phone.

Thanks for all the pics! I'm glad everyone loves them!

I may swap out my Cubes with a set of Revolvers once the floods are released.