Jeep JK Wrangler Smittybilt XRC Front Fenders and Rear Corner Guards 07-14
08-20-2013, 08:47 AM
#1
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Jeep JK Wrangler Smittybilt XRC Front Fenders and Rear Corner Guards 07-14
The new line of XRC JK front fenders was specifically engineered to provide the protection and clearance needed when you're pushing your rig through the toughest conditions. Each piece of armor is manufactured out of 3/16" cold rolled steel and then powder coated in Smittybilt's signature series two stage matte black powder coat finish. Each fender is designed to be a complete bolt- on with stainless steel fasteners and requires no modification to the vehicle. All of the XRC Fenders come with an inner fender liner to keep mud, snow or any other debris out of the engine compartment and replaceable slide plates.
Features:
- Two stage matte black powder coat finish
- 3/16" cold rolled steel
- Includes inner fender
- Stainless steel hardware
- No modification to vehicle required
Smittybilt XRC Front Fenders, Black Textured, 2007-2013 Jeep JK Wrangler
Smittybilt XRC Rear Corner Guards, Black Textured, 2007-2013 Jeep JK Wrangler 4 Door Unlimted
Smittybilt XRC Rear Corner Guards, Black Textured, 2007-2013 Jeep JK Wrangler 2 Door
Features:
- Two stage matte black powder coat finish
- 3/16" cold rolled steel
- Includes inner fender
- Stainless steel hardware
- No modification to vehicle required
Smittybilt XRC Front Fenders, Black Textured, 2007-2013 Jeep JK Wrangler
Smittybilt XRC Rear Corner Guards, Black Textured, 2007-2013 Jeep JK Wrangler 4 Door Unlimted
Smittybilt XRC Rear Corner Guards, Black Textured, 2007-2013 Jeep JK Wrangler 2 Door
Last edited by Baseline 4x4 Outfitters; 08-26-2013 at 07:56 PM.
08-26-2013, 07:52 PM
#2
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
09-16-2013, 10:43 AM
#5
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
09-21-2013, 06:20 AM
#6
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
09-25-2013, 11:49 AM
#7
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts