New AEV Rear Track Bar Tower Kit and Control Arm Brackets
Thread Starter
Sponsoring Vendor
Quadratec Rep
Quadratec Rep
Joined: Sep 2006
Posts: 43
Likes: 0
New AEV Rear Track Bar Tower Kit and Control Arm Brackets
The AEV / Nth Degree Rear Track Bar Tower Kit greatly improves on road handling and ride quality. For use with 3-4" Lifts. This kit is included in all Wrangler JK Lift Kits from AEV / Nth Degree.
http://www.quadratec.com/products/16502_4200.htm
AEV is proud to offer the single biggest improvement to the Wrangler JK Suspension. These new Front Control Arm Brackets are a win-win in terms of performance. These new brackets will: Improve front impact ride quality (expansion joints, ledges), Increase Anti-Dive for improved braking performance, Decrease the operating angle range of the front driveshaft and Eliminate the need for adjustable control arms or cam bolts for caster correction.
http://www.quadratec.com/products/pr...?id=16502+4300
http://www.quadratec.com/products/16502_4200.htm
AEV is proud to offer the single biggest improvement to the Wrangler JK Suspension. These new Front Control Arm Brackets are a win-win in terms of performance. These new brackets will: Improve front impact ride quality (expansion joints, ledges), Increase Anti-Dive for improved braking performance, Decrease the operating angle range of the front driveshaft and Eliminate the need for adjustable control arms or cam bolts for caster correction.
http://www.quadratec.com/products/pr...?id=16502+4300
