Teraflex control arms directions wrong?
12-07-2008, 10:28 AM
#21
JK Super Freak
Thread Starter
Join Date: Dec 2007
Location: WV relocated 2 Dyess AFB, TX
Posts: 1,750
Likes: 0
Received 1 Like
on
1 Post
I was just surfing around the TF web site and see they sell the flex ends for the control arms separately, and they list both a left and right part number. This would suggest the ones we've received are either both left or both right, explaining why one zerk would point up and one down. I'm thinking that probably also means the adjustment is off by half a turn on one side or the other. 
Attachment 16265
Attachment 16265
12-08-2008, 01:56 PM
#22
Sponsoring Manufacturer
Front upper arms: Axle end, insert bolt in the end holes.
Front lower arms: Mount with clevite bushing end on frame, modular flex joint on axle end. Current production ends will have one grease zert up and the other down. Looks like it will 4-5 months before the ends come with 2 holes for grease zerts.
Rear upper arms: Flex end joint bolts in frame end
Rear lower arms: Mount with clevite bushing end on frame, modular flex joint on axle end.
Because of these thread and several others recently, new improved instructions are in the works.
12-08-2008, 02:18 PM
#24
JK Super Freak
Thread Starter
Join Date: Dec 2007
Location: WV relocated 2 Dyess AFB, TX
Posts: 1,750
Likes: 0
Received 1 Like
on
1 Post
Thanks TF for checking in. Love your products and your help. I can confinently say that I will end up with a lot more TF stuff in the future!
12-08-2008, 06:51 PM
#26
Sponsoring Manufacturer
