Win a Free OR-Fab Sports Cage, Hammer Head Front Bumper, or Rear Bumper
Thread Starter
Sponsoring Manufacturer
OR-FAB
OR-FAB
Joined: Jan 2011
Posts: 567
Likes: 0
From: Scottsdale, AZ
Crap! I'm on vacation away from my rig and don't have a "close-up"! So this is all I have from other posting (crossing fingers).
It's a 1.25 RC body lift and noticeably has a body lift compared to the rig next to it and the spacers are almost visible in a couple pics... If it doesn't count I understand but had to try. Thanks and good luck everyone!
Attachment 403919
Attachment 403920
Attachment 403921
It's a 1.25 RC body lift and noticeably has a body lift compared to the rig next to it and the spacers are almost visible in a couple pics... If it doesn't count I understand but had to try. Thanks and good luck everyone!
Attachment 403919
Attachment 403920
Attachment 403921
What if I got the kit but have not installed it yet?
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=403941"/>
the jeep
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=403942"/>
the mrs.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=403945"/>
the lift
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=403941"/>
the jeep
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=403942"/>
the mrs.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=403945"/>
the lift
Loved them when I still had them in... just took them out this past summer because I have a new baby and there was no easy way to install the child seat. They will go back in once she is old enough to be in a booster seat but the bench is back in now. I used a mastercraft seat bracket the only thing I didnt like is it sat the seats high when I do it again I will probably make my own bracket to sit them lower and back I think. But it looked good and was much more comfortable.
Thread Starter
Sponsoring Manufacturer
OR-FAB
OR-FAB
Joined: Jan 2011
Posts: 567
Likes: 0
From: Scottsdale, AZ






