AEV 2.5" lift question
#1
JK Newbie
Thread Starter
Join Date: Jan 2010
Location: Fort Collins, Co
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
AEV 2.5" lift question
So I do most of my own work but I'm contemplating letting a well-known local shop do the install of a 2.5 AEV lift for me. (2012 JKU Rubicon)
I'll also be installing 35" trail grapplers
They're saying I need an AFE cross pipe. Is this correct? I hadn't seen this in my resarch on the forum.
Any feedback much appreciated.
I'll also be installing 35" trail grapplers
They're saying I need an AFE cross pipe. Is this correct? I hadn't seen this in my resarch on the forum.
Any feedback much appreciated.
#2
JK Enthusiast
So I do most of my own work but I'm contemplating letting a well-known local shop do the install of a 2.5 AEV lift for me. (2012 JKU Rubicon)
I'll also be installing 35" trail grapplers
They're saying I need an AFE cross pipe. Is this correct? I hadn't seen this in my resarch on the forum.
Any feedback much appreciated.
I'll also be installing 35" trail grapplers
They're saying I need an AFE cross pipe. Is this correct? I hadn't seen this in my resarch on the forum.
Any feedback much appreciated.
#5
AEV says not needed.
JK DualSport XT Suspension 2.5" - Shop By Category
JK DualSport XT Suspension 2.5" - Shop By Category
#6
You will need either that or exhaust spacers for the 2012 & 2013. The exhuast is different than prior years and your driveshaft will touch the boot and destroy it. Some folks say theirs didn't touch but mine sure did! I used Teraflex spacers on mine. There is a video on it on the Tflex site. I wouldn't chance it myself for a simple fix.