Hi Everyone~

After replacing my Evap Canister and ESIP (after the trail ate it), I cleared the DTC's with my tuner. However, "GAsCAp" still shows in the Odometer's place. Anyone know how to clear it ? Thanks in advance ! ~Dan

 

Reset on the steering wheel? Not sure
Be sure the code is cleared .

 

There's nowhere to clear on steering wheel... I've cleared the DTCs and just to be sure I read the DTCs afterwards and it confirmed there were no DTCs. I had heard something about stepping on the gas pedal 3 times or so rapidly before starting...anyone heard/can confirm ? ~Dan

 

That clears the oil message. Key on depress gas pedal 3 times in 10 seconds, turn key off.

 

you can pull the battery cable to clear but if there is still a fault the code will pop back up