Installing Softtop on 2013 JK
2 Attachment(s)
Attachment 547373Hi Everyone,
I've taken the hardtop off my 2dr JK and put the softtop on. I'm just not sure if I've put the arms in the right position as there seems to be a considerable gap at the back. I'm unable to pull the back all the way (must be short at least 3-4 inches). Can someone confirm I've indeed correctly put the 2 arms in the right position or what else may be the problem? All of the videos out there seem to be only applicable for the 4 door model. Thanks in advance! |
backwards?
are they backwards?
I'd have to look at mine, and I guess I'll test it tonight because I haven't actually flipped mine UP yet lol. Garage + 2nd car = top down 24/7. |
Looks like the arm going up is wrong
|
Originally Posted by HELLBENDER-JK
(Post 3893290)
Looks like the arm going up is wrong
The lack of info in the owner's manual is quite frustrating. |
I went out and looked at mine and it's the same as yours. What does the part look like that is not going down?
Also, you need to have the rear hooked before you attach the front clips at visors |
Originally Posted by HELLBENDER-JK
(Post 3893325)
I went out and looked at mine and it's the same as yours. What does the part look like that is not going down?
Also, you need to have the rear hooked before you attach the front clips at visors |
do the back first, flip the front back like it would be open and let it sit in full sun. It will fit, it just takes 2 people sometimes
|
1 Attachment(s)
Maybe the material is just too tight...that is a lot of stretching it needs to give. Guess I will have to wait for a hot sunny day for the material to stretch enough.
|
All times are GMT -8. The time now is 11:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands