Please help with Picture of Evap Purge Wiring 2009 JK
 

Guys, a pesky varmint ate into some of my wiring last month and my jeep tossed a CEL. I read it and it said the purge system was the issue. I though it was a leak, but no. It turned out to be that something ate into my wiring and completely consumed the connection from the evap to the wiring box. Now I've got a replacement and torn into It I have 2 big issues.

I can't find where the wire terminates. I have this green wire that I have no clue were it goes either.
Can someone help me with a picture of where these things terminate?

Before:
https://cimg4.ibsrv.net/gimg/www.jk-...0633491566.jpg


Wires that I have no clue where to reattach. The first one runs by the fender and is BROWN with a green stripe.

https://cimg1.ibsrv.net/gimg/www.jk-...2edc8e7f11.jpg

The next one is the evap purge. Those wires were blue and white and blue with a black line. It HAD a flexible plastic protector.
https://cimg2.ibsrv.net/gimg/www.jk-...38c4b904da.jpg

I found one of them. Little basters ate the wires alway under the bundle. This was all that was left
1https://cimg2.ibsrv.net/gimg/www.jk-...00631de578.jpg

CEL code is gone. I just have that random brown wire with a green strip.

Nice work -- The only thing worse would be that happening in the middle of nowhere. I looked on my 2008 and don't see that brown w/ grn stripe wire. You probably already checked that nearby body ground for a lug missing a wire, but thought it worth mentioning. Best of luck!

:beer:

Thanks. I think I narrowed this down. My guess it that this was my aftermarket kit that turned a JKRU without a hardtop into one that has a hardtop wiper control.
I'll know when I put the hard top back on and try to turn on the rear wiper.