Notices
Stock JK Tech Bulletin board forum regarding issues with OE (original equipment) components of the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) such as factory suspension parts, engine, transmission, body parts, interior fixtures and the on-board computer.

Redoing interior panels

Thread Tools
 
Old Jun 12, 2021 | 11:41 AM
  #1  
jholmgren5's Avatar
Thread Starter
JK Newbie
 
Joined: Jun 2019
Posts: 6
Likes: 2
From: Standish, Maine
Default Redoing interior panels

Hi,

I bought a 2012 jk 4 door a could years ago. Its a Sahara, and the interior panels came a in a brownish (cowboy brown) color, to match the same color leather seats. I would like to slowly change all the panels (glovebox, lower dash, door panels, etc) to the stock black color to match a color scheme I’m going for. once that is done, I will get seat covers to match the black with blue accents I’m going for. But I can’t find the proper place to buy them. Any ideas? Thanks!
Reply
Old Jun 12, 2021 | 04:41 PM
  #2  
resharp001's Avatar
JK Jedi
FJOTM Winner
10 Year Member
Loved
Community Favorite
 
Joined: Jun 2013
Posts: 11,360
Likes: 2,089
From: Willow Park, TX
Default

That sounds like an expensive endeavor considering what those parts tend to cost. I know this might sound like a really stupid idea, but would professional vinyl wrapping make sense to help with the color change considering there is nothing wrong with your panels/parts outside of the color?
Reply
Old Jun 12, 2021 | 09:18 PM
  #3  
Moodyalaskan's Avatar
JK Newbie
 
Joined: Feb 2018
Posts: 51
Likes: 19
From: Chugiak, Alaska
Default

Check into Plastic/Vinyl black paint. Painted a set of seats in an 82 Ford and the paint lasted quite a while. Maybe check out Eastwood Auto Restorers.

SEM Classic Coat Leather and Vinyl Paint Aerosol Black (eastwood.com)
Reply
Old Jun 14, 2021 | 01:13 PM
  #4  
jholmgren5's Avatar
Thread Starter
JK Newbie
 
Joined: Jun 2019
Posts: 6
Likes: 2
From: Standish, Maine
Default

Thanks guys. I’ll definitely check into wrapping or painting. I knew it could cost a lot, but figured it might not hurt as much over a longer period of time replacing them.
Reply




All times are GMT -8. The time now is 09:23 AM.